DreamStar Auto operates in CPAP and Auto-CPAP modes. In its Auto-CPAP mode, DreamStar Auto automatically adjusts the pressure as a function of the severity of the detected respiratory events (apneas, hypopneas, inspiratory flow limitations, snoring). Thanks to its capability to differentiate between obstructive and central events, DreamStar Auto is compatible with OxyLink module (synchronization of oximetry data) and can be connected to the SEFAMConnect platform.
The 'Auto-on' function allows the patient to start the treatment with a single breath in the mask. The device can be started at any time by pushing the on/off button.
INtelligent RAMP (i-ramp)
The intelligent ramp function (I-Ramp) makes it possible to start the treatment at an adjustable, more comfortable pressure (the ‘comfort pressure’), making falling asleep easier and more comfortable. It also optimizes the treatment efficacy by adapting the time in ramp to the detection of respiratory events that indicate that the patient is asleep. Once the device detects respiratory events (indicating that the patient is asleep), it will gradually and comfortably increase the pressure to reach the prescribed pressure or switch on the auto-algorithm depending on the selected mode. As the total duration of the ramp will be reduced, patients spend more time at effective pressure improving their overall compliance.
A cigarette-lighter cable is available as an accessory.
When the patient removes the mask, the pressure drops to the minimum level in just a few seconds. The device turns off after 30 minutes if the therapy is not resumed.
SPECIFIC AUTO-CALIBRATION FEATURE
Choose any type of mask or tubing! Versatility and flexibility were never easier thanks to our advance resistance control. This technology will ensure that the prescribed pressure is delivered at the patients interface at all times regardless of the configuration of the pneumatic pathway (mask type, diameter and length of the circuit and the presence or absence of a humidifier).
DreamStar Auto is compatible with the OxyLink module (which synchronizes oximetry data) and can be linked to the SefamConnect telemonitoring platform.
COMFORT CALIBRATION FEATURE (CC+)
CC+ makes the patient's breathing more comfortable during the inspiratory (pressure increase) and expiratory phases (pressure decrease) without the need to pre-set the level of pressure relief. CC+ is fully automatic and adapts to the respiratory cycles of any patient without compromising the treatment efficacy. Activate this ‘cruise control’ for enhanced comfort.
HUMID CONTROL+ TECHNOLOGY
The patented Humid Control + technology minimizes condensation in the patient’s circuit and maintains a stable level of humidity throughout the night.
|Mode||Pressure||Max flow||Ramp time||Noise level||Dimensions||Weight|
|4 to 20 cm H2O adjustable in 0,5 cm H2O increments||180 lpm at 20 cm H2O||Adjustable from 0 to 45 min||26 dBA||D x W x H:
23 x 20 x 12 cm
|1,5 kg with humidifier;
1,4 kg without humidifier