DreamStar Info

DreamStar Info (CPAP), detects residual respiratory events, calculates the leak level, and monitors patient compliance so that the doctor can easily evaluate the therapy efficacy.

All data is saved in the device’s memory and can be read using the DreamStar Analyze software. The Specific Calibration, Comfort Calibration (C++) mode, and intelligent ramp (I-Ramp) increase therapy efficacy and compliance.

DreamStar Info is compatible with the OxyLink module (synchronizing oximetry data) and can be linked to the SEFAMConnect telemonitoring platform.

Auto-ON feature

The ‘Auto-on’ function allows the patient to start the treatment with a single breath in the mask. The device can be started at any time by pushing the on/off button.


When the patient removes the mask, the pressure drops to the minimum level in just a few seconds. The device turns off after 30 minutes if the therapy is not resumed.


CC+ makes the patient's breathing more comfortable during the inspiratory (pressure increase) and expiratory phases (pressure decrease) without the need to pre-set the level of pressure relief. CC+ is fully automatic and adapts to the respiratory cycles of any patient without compromising the treatment efficacy. Activate this ‘cruise control’ for enhanced comfort.

Intelligent ramp

The intelligent ramp function (I-Ramp) makes it possible to start the treatment at an adjustable, more comfortable pressure (the ‘comfort pressure’), making falling asleep easier and more comfortable. It also optimizes the treatment efficacy by adapting the time in ramp to the detection of respiratory events that indicate that the patient is asleep. Once the device detects respiratory events (indicating that the patient is asleep), it will gradually and comfortably increase the pressure to reach the prescribed pressure or switch on the auto-algorithm depending on the selected mode. As the total duration of the ramp will be reduced, patients spend more time at effective pressure improving their overall compliance.

Specific auto-calibration feature

Choose any type of mask or tubing!  Versatility and flexibility were never easier thanks to our advance resistance control. This technology will ensure that the prescribed pressure is delivered at the patients interface at all times regardless of the configuration of the pneumatic pathway (mask type, diameter and length of the circuit and the presence or absence of a humidifier).

Humid control+ technology

The patented Humid Control + technology minimizes condensation in the patient’s circuit and maintains a stable level of humidity throughout the night.

Battery operation

A cigarette-lighter cable is available as an accessory.


EcoStar Auto is compatible with the OxyLink module (which synchronises oximetry data) and can be linked to the SEFAMConnect telemonitoring platform.

Mode Pressure Max flow Ramp time Noise level Dimensions Weight

4 to 20 cm H2O adjustable in 0,5 cm H2O increments

180 lpm at   20 cm H2O Adjustable from 0 to 45 min 26 dBA D x W x H:
   23 x 20 x 12 cm

1,5 kg with humidifier, 1,4 kg without humidifier



click here to access all brochures and documents concerning the DREAMSTAR info unit:

Complementary Products









DreamStar water reservoir: M-315510-14


DreamStar cover: M-315530-32


Filter holder kit (27 x 42): M-314820-02


Inlet air filter (27 x 42): M-414840-06 (96 pcs) / M-314850-08 (10 pcs)


High efficiency filter (27 x 42): M-414841-07 (100 pcs) / M-314850-09 (10 pcs)


Cigar lighter cable 3A: M-214530-01


Battery cable 3A ring term: M-214530-00


Swivel outlet elbow : M-267010-00


1,8m ∅22mm Patient circuit: M-261000-04


1,8m ∅15mm Patient circuit: M-261000-00


Hybernite heating circuit with power supply: ROC2300


Hybernite circuit: HBT300


Power pal on/off switch for hybernite: POWERPAL


DreamStar carrying case: M-815505-00

Complementary products